Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lynwood
If you live in Lynwood and your driveway gate has started grinding, sagging, or jumping its track, you’re not alone. The housing stock here, mostly post-war bungalows on narrow lots, means nearly every home has a slide gate, and most of them were installed 20 to 30 years ago. We’re Ironworks Gate Co., and we handle gate parts and welding for Lynwood homeowners every week. A gate hinge replacement in Lynwood typically runs $180-$340, and most part repairs are completed the same day we arrive. Call us at (213) 497-0081 and a live person answers, 24 hours a day.
Why Ironworks Gate Co. Is Lynwood’s Preferred Gate Parts & Welding Company
We’ve been in the gate trade since 1984, and the work we do in Lynwood follows the same standard we’ve held for over 42 years: fix it right, charge what we quoted, and stand behind it in writing. Homeowners in 90262 call us because the gate on their property has been there since the 1990s or early 2000s, and they want someone who understands what happens to a 25-year-old slide gate when the driveway underneath it has been settling for half a century.
Our crews know the neighborhoods here. We work on gates along Long Beach Boulevard, in the blocks around Lynwood Park, and on the older streets south of Martin Luther King Jr. Boulevard. We know what a derailed roller sounds like when it grinds against a cracked track channel. We know which post-war slabs have heaved and which welded joints are starting to rust from the morning marine layer. That local knowledge means we diagnose faster and quote accurately. Every job is protected by the 90-Day Done Right Promise, in writing, with no paperwork and no arguing. If it’s not right, we come back and make it right.
Our Gate Parts & Welding team is trained on nine gate-automation brands, including FAAC, BFT, and Linear. We do not sell you a new operator when a $40 roller set and a track adjustment would fix the problem. Every technician is background-checked and uniformed, working the way they would work on their own mother’s driveway.
Our Gate Parts & Welding Services in Lynwood
Hinge Replacement
Worn hinge pins and wallowed hinge barrels are the most common cause of a sagging swing gate in Lynwood. On the older ornamental iron gates found throughout 90262, we typically replace hinges in pairs, set the post shims to restore gate alignment, and re-weld the hinge tabs where rust has weakened the original welds. A hinge replacement in Lynwood runs $180-$340 for most residential gates.
Post Replacement
In Lynwood, a gate post is only as good as the concrete it sits in. We regularly pull posts from old post-war footings that have cracked and shifted, pour new footings, and set the post plumb before re-hanging the gate. A post replacement typically runs $400-$900 depending on post size and whether we need to core out the old footing. The gate is squared to the post, not the other way around.
Rail Repair
Steel bottom rails on slide gates take a beating in Lynwood, especially where moisture collects and rust pits the underside. We cut out rotted rail sections, weld in new steel, and reinforce the joints so the gate rolls smoothly over the full travel. Rail repair in Lynwood typically runs $250-$550, and we usually complete the work in a single visit.
Custom Welding
Sometimes the right fix is not a replacement part at all. We weld cracked gate frames, re-attach ornamental pickets, build custom mounting brackets for operators and safety sensors, and reinforce weak post-to-rail connections. Custom welding in Lynwood is quoted up front, agreed before any work starts, and priced by the specific job, not by the hour with an open-ended ticket.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lynwood
The operators bolted to Lynwood gates span every brand installed during the security-hardening wave of the 1990s and 2000s. We’re trained and equipped on nine major brands, and the ones we see most often in 90262 are Linear, Viking, FAAC, and BFT. We stock the gears, control boards, and limit switches these older operators need, which means less waiting when a part fails. If your opener is running but the gate barely moves, we will tell you whether the fix is a $30 gear or whether the unit is beyond its service life.
Common Gate Parts & Welding Problems We See in Lynwood Homes
- Bottom roller derailment from cracked, heaved track channels. In Lynwood, the single most common slide-gate failure pattern is a derailed or grinding bottom roller caused by cracked and heaved concrete track channels in older driveways. This problem barely exists in newer neighboring cities like South Gate or Paramount, where most slabs were poured decades later. The fix is usually a new roller set plus track bed re-leveling and re-welding, not a new gate.
- Rust-pitted weld joints and hinge posts. Lynwood sits roughly 12 miles inland from the Pacific. The morning marine layer carries salt-laden humidity, and the afternoon sun plus LA Basin smog creates an oxidizing atmosphere. That combination accelerates rust pitting on the wrought iron and powder-coated tubular steel gates found on nearly every block. We see hinge posts rusting through right at the weld line while the rest of the post looks fine.
- Worn rack and pinion teeth on 20-30-year-old slide operators. The original slide operators on many Lynwood gates used steel racks bolted to the gate and a pinion gear on the motor. After two or three decades of daily cycling, the teeth wear down and skip under load, especially when the gate has been dragging on a rough track. Replacing the rack and pinion is often cheaper and smarter than installing a new operator.
- Settled gate posts throwing off the entire system. Decades of driveway concrete settling and cracking beneath embedded ground tracks is a persistent source of misalignment service calls throughout Lynwood. When the driveway heaves, the post can tilt, and then the gate drags, and then the operator stalls. We address the post and track before anything else.
Pricing for Gate Parts & Welding in Lynwood, CA
Here are the ranges we quote for common repairs in Lynwood. Hinge replacement: $180-$340. Roller replacement and track adjustment: $150-$300. Bottom rail repair: $250-$550. Post replacement with new footing: $400-$900. Custom welding: $120-$450 depending on the repair. Rack and pinion replacement: $300-$600. What moves the price within these ranges is the condition of what we find underneath: a track channel that has heaved badly, a post footing that has disintegrated, or a frame that needs more welding than the initial look suggested. Every quote is agreed in writing before we turn a single bolt. Estimates are free, and we will not start work until you approve the number. Call (213) 497-0081 and we will schedule a visit to your Lynwood home.
We Also Serve Cities Near Lynwood
Ironworks Gate Co. works throughout the Gateway Cities corridor. If you have family or property in South Gate, Paramount, Huntington Park, or Bell Gardens, our Lynwood crews can handle their gate work too. Same company, same written guarantee.
Serving Lynwood, CA - Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lynwood
The ground track has likely heaved or cracked beneath the gate. In Lynwood, most driveways were poured between the late 1940s and mid-1960s, and those slabs have settled unevenly over 50-plus years. The bottom roller catches on a lifted or broken section of the track channel, and the gate climbs the rail and jumps. The permanent fix is re-leveling and re-welding the track bed, replacing the rollers, and sometimes cutting out and repouring the worst section of the channel. Call (213) 497-0081 for a free estimate and we will confirm what is actually happening under the gate.
Yes. We do this regularly in Lynwood. The process is to cut the old post free from the gate, remove it from the footing, core out the old concrete, pour a new footing, set the new post plumb, and re-weld the hinge tabs. The gate stays in place and gets re-hung the same day in most cases. It runs $400-$900 depending on post size. Call us for a fixed quote before the work starts.
Often yes. On 20-30-year-old LiftMaster slide operators in Lynwood, the most common culprit is a worn drive gear or stripped rack teeth, not a dead motor. A gear replacement is usually $300-$600, which is far cheaper than a new operator. We will tell you honestly if the unit is beyond its service life and a replacement is the cheaper answer over the next five years. Call (213) 497-0081 and we will inspect it on site.
Yes, and we treat this as a safety requirement, not an upsell. Gates installed in the 1990s and early 2000s often lack the safety photocells and reversing edges required by current UL 325 standards. If someone or something is in the gate path, the operator must stop and reverse. We retrofit safety edges and photocells onto older operators, and if your unit cannot accept them, we will recommend replacement with a current model that meets the standard. This is not a corner we will let you skip. Call us and we will check what your gate has.
The weld zones are where the factory coating was burned off during fabrication, and touch-up paint applied at installation rarely holds up for 20-plus years. In Lynwood, the morning marine layer deposits salt-laden moisture that settles right into those exposed spots. The result is localized rust pitting at the weld joints while the rest of the gate looks intact. We grind out the rusted sections, re-weld, and recoat. If the pitting is deep enough to compromise the frame, we will show you and recommend reinforcing or replacing that section. Call (213) 497-0081 for an honest assessment.
Call Ironworks Gate Co. for Gate Parts & Welding in Lynwood
If your gate is grinding, sagging, derailing, or rusting through, call us at (213) 497-0081. We will put you on the phone with a live person, schedule a visit, and quote the price up front before any work begins. Free estimates, nine automation brands, and a written 90-Day Done Right Promise on every job. That is our standard. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lynwood and Gateway Cities homeowners since 1984.