Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Lynwood
Gate motor and opener repair across Lynwood’s 90262 typically runs $280-$580 for motor replacement and $180-$340 for control board or limit switch work, with most slide-gate service calls completed same day. We work on the worn slide gates and legacy operators that dominate this city’s post-WWII bungalow lots, where 50-year-old driveway concrete has settled and thrown ground tracks out of line. If your gate grinds, stalls halfway, or the motor hums without moving, call (213) 497-0081 and a live person answers, day or night.
Lynwood is not a swing-gate town. The narrow lots off Long Beach Boulevard, Imperial Highway, and around Plaza Mexico mean nearly every driveway gate slides on a track. That one fact shapes most of the motor failures we see here, and it’s why we send a technician who knows this city’s specific failure patterns rather than a generalist who starts guessing.
Why Ironworks Gate Co. Is Lynwood’s Preferred Gate Motor & Opener Company
We have spent more than four decades working on gates, and the calls we take from Lynwood homeowners follow a familiar pattern: a slide gate that worked fine since the 1990s now grinds, stalls, or trips its breaker. Victor Salinas built Ironworks Gate Co. in 1984 on a simple rule: fix the gate the way you would fix your own mother’s. That means diagnosing the real cause, not just swapping parts until something sticks.
Every technician who rolls into Lynwood is background-checked, uniformed, and trained on nine opener brands, including Linear, Viking, Ghost Controls, and DoorKing. We carry the boards, limit switches, and gear kits those older Lynwood gates actually use, so most calls finish in one visit. The written 90-Day Done Right Promise covers every job we complete, no paperwork war required. If it is not right, we come back.
Our Gate Motor & Opener team knows to check the ground track first on any Lynwood slide-gate call. The residential slabs throughout 90262 have settled unevenly over decades, and a heaved or cracked track channel is the single most common repair pattern in this city. That local knowledge cuts diagnosis time and keeps the bill honest.
Our Gate Motor & Opener Services in Lynwood
In Lynwood, the work splits along a clear line: motors that can be repaired in place, and gates that have sagged or shifted enough that the motor is fighting a losing battle. Here is what that looks like on the driveway.
Motor Installation
A new slide-gate motor in Lynwood runs $390-$780 installed on average, depending on the gate’s weight and whether we reuse the existing rack or install a new one. On homes near the 90262 corridor around Fernwood Avenue or State Street, we often pair a new motor with a track reset because the old slab has moved under the gate’s load. The quote is agreed before any work starts, so the number on the invoice matches the number on the estimate.
Motor Repair
Many Lynwood operators from the 1990s and early 2000s still have serviceable motors but failed control boards, corroded terminals, or worn gear assemblies. A board replacement runs $180-$340 on most Linear and DoorKing units in this area. The salt-laden morning humidity off the coast, twelve miles west, accelerates terminal corrosion on these older boards. We diagnose the board in place and tell you plainly if a repair or a replacement motor is the cheaper answer over five years.
Linear Motor
Linear operators are the standard on Lynwood’s slide gates, and the common failure here is not the motor itself but the rack and pinion mesh. When driveway concrete settles, the pinion gear climbs or drags on the rack, and the motor burns out fighting the bind. We reset the rack to the new slab elevation and replace the motor only if it has already been damaged, which keeps the cost down on homes near Lindbergh Park or along Martin Luther King Jr. Boulevard.
Slide Motor
Slide-gate motor replacement in Lynwood runs $320-$640 for most residential tubular-steel gates. The variable is whether the post footing has shifted. On a 1998 gate off Imperial Highway, we found the bottom roller had derailed from a cracked track channel caused by a heaved driveway slab. The original LiftMaster operator had burned out after months of fighting that bind. We cut out the failed track section, re-poured the post footing, reset the rack mesh, and installed a new FAAC 391 operator with a safety photocell. That gate now glides and self-reverses on obstruction. That is the difference between replacing a motor and actually fixing the gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lynwood
We service the brands already on Lynwood’s driveways: Linear operators on older slide gates, Viking and DoorKing units on newer installs, and Ghost Controls rigs that homeowners added to retrofit kits. We keep common boards, gear kits, and safety edges for these brands stocked on the trucks that cover Lynwood, so we usually complete a repair on the first visit instead of scheduling a follow-up for parts. If your opener is obsolete and the board is no longer made, we tell you straight and quote a modern retrofit that fits the existing gate.
Common Gate Motor & Opener Problems We See in Lynwood Homes
- Ground track heave from settled concrete. The 50-plus-year-old driveway slabs across 90262 settle unevenly, cracking the track channel and derailing the bottom roller. The motor then strains against the bind and burns out. This is the leading cause of slide-gate motor failure in Lynwood, and it is far rarer in swing-gate-heavy suburbs like Downey or Bellflower.
- Corroded control boards from coastal humidity and smog. Morning marine layer carries salt-laden moisture inland to Lynwood, and the LA Basin’s oxidizing atmosphere does the rest. Terminals and relays on 1990s boards pit and fail. We see it on Linear and DoorKing boards throughout the Gateway Cities corridor.
- Welded joint cracks at the hinge post. Retrofitted ornamental iron gates from the 1990s security-hardening wave often crack at the post welds as the gate sags. That sag shifts the gate’s weight onto the operator, overloading the motor.
- Missing or failed safety photocells. Older Lynwood gates were often hung before modern safety requirements, and their photo eye sensors are either absent or dead. A gate that will not reverse on obstruction is dangerous, and we will not leave a job with that condition unresolved.
Pricing for Gate Motor & Opener in Lynwood, CA
What you will pay in Lynwood depends on what actually failed.
| Service | Typical Lynwood Range |
|---|---|
| Motor repair (board, gear, limit) | $180 - $340 |
| Slide motor replacement | $320 - $640 |
| Full motor installation new | $390 - $780 |
| Track reset and re-pour footing | $250 - $550 |
| Safety photocell add or replace | $90 - $180 |
These are real ranges we have quoted on Lynwood driveways, not brochure numbers. The price is set and agreed before a single bolt is turned, and the 90-Day Done Right Promise is in writing on every job. Current offers include $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans take 5% off, always.
We Also Serve Cities Near Lynwood
When the call comes from South Gate, Paramount, Huntington Park, or Bell Gardens, we treat it the same as a Lynwood call: a live person answers, a technician who knows the Gateway Cities shows up, and the price is settled before work begins. If you’re reading this from a neighboring city, our Lynwood service area is where we coordinate local dispatch, and we cover the surrounding blocks without hesitation.
Serving Lynwood, CA - Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Lynwood
In Lynwood this is nearly always a ground-track problem. The concrete under your gate has settled over the last 50-plus years, and the track channel has heaved or cracked mid-run. The gate derails or binds at that point, and the motor stalls. The fix is a track reset and re-pour of the affected section, plus a motor check after the bind is cleared. Call (213) 497-0081 and we will diagnose it on site, free estimate included.
Yes, in most cases. A 20-year-old tubular-steel or ornamental iron slide gate in Lynwood can usually accept a modern Linear, FAAC, or Viking operator, provided the post footings are still sound and the rack can be reset to the current slab elevation. We will tell you honestly if the gate itself is too far gone and replacement is the cheaper long-term answer.
UL 325 is the safety standard that requires gate operators to have obstruction detection, including photocells or contact edges that reverse the gate when something is in its path. Many Lynwood gates hung in the 1990s predate the current standard. We will not re-energize an older operator without bringing it into compliance on safety devices, and we fold that cost into the repair quote upfront.
Lynwood sits about twelve miles inland, close enough for the marine layer to deliver damp, salt-laden air most mornings, while the afternoon sun and LA Basin smog bake that moisture onto the metal. That combination pits control terminals, relay contacts, and exposed hardware faster than in drier inland suburbs like Downey to the northeast. It is a real local condition worth factoring into your maintenance schedule.
Often neither. The sag is usually a cracked weld at the hinge or post end, and the strain is the motor carrying weight it was never meant to lift. We weld the joint, reset the track, and test the motor under load before quoting any replacement. If the motor has already burned out from the fight, we will show you that damage and quote a replacement motor as a separate line item. Call (213) 497-0081 for an honest read, free estimate, no pressure.
From the 90262 blocks around Lynwood High School to the streets off Long Beach Boulevard and Imperial Highway, we know why your gate motor is failing and we know how to fix it for good. Call (213) 497-0081 for a free estimate, day or night. A live person answers, and we will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lynwood, CA with gate repair and automation since 1984.