Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lynwood
A new driveway or security gate in Lynwood typically runs between $2,800 and $9,500 installed, depending on the gate material, automation package, and what we find under the existing concrete. Most jobs in the 90262 zip code are completed in one day once the gate is fabricated and the track is prepared. We’ve worked the residential streets off Long Beach Boulevard and Imperial Highway long enough to know exactly what a 60-year-old driveway slab does to a new slide gate, and we plan for it before the first bolt goes in. If you’re calling about a gate that’s been grinding, sagging, or refusing to open, our Gate Repair in Lynwood team answers at (213) 497-0081 and a live person will pick up.
Why Ironworks Gate Co. Is Lynwood’s Preferred Gate Installation Company
Lynwood homeowners have very little patience for gate companies that show up late, quote one price, and bill another. That’s the reputation problem in this trade, and we built our name by doing the opposite for over 42 years, since 1984. Gate Installation in Lynwood is not a side job for us. It’s the only thing we do.
The homes here are mostly post-war bungalows packed onto narrow lots. That means short driveways, slide gates rather than swing gates, and concrete that has settled unevenly for half a century. Our technicians know to inspect the embedded ground track before recommending any new gate in Lynwood, because a heaved track channel will derail even a brand-new bottom roller within weeks. That local knowledge is not something a generalist outfit from outside the Gateway Cities brings to the job.
We answer the phone 24 hours a day, 7 days a week. Not a voicemail tree. A person. When you call about a gate in Lynwood, you reach someone who understands the difference between a 1998 LiftMaster on a settled slab and a 2015 FAAC on flat newer concrete. Every job, from a simple pedestrian gate to a double driveway slide gate, carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No arguing, no paperwork, no exceptions.
Our Gate Installation Services in Lynwood
Driveway Gate Installation
Most Lynwood driveways are too short for a gate to swing inward or outward without hitting a car, a wall, or the sidewalk. That’s why the slide gate is the standard here, and why we fabricate and install so many of them. A typical driveway slide gate in Lynwood runs $3,200 to $7,800 depending on length, material, and automation. We quote the exact number before we start. No surprises on the bill, ever.
Pedestrian Gate Installation
A matching pedestrian gate beside the driveway keeps foot traffic controlled without cycling the heavy driveway operator every time someone walks up. On Lynwood’s narrow lots, a pedestrian gate is often the difference between neighbors cutting through the yard and not. These installations run $1,100 to $2,900 installed, including the post, hinges, latch hardware, and frame. We match the steel profile and finish to your existing driveway gate so the pair looks like it was always there.
Sliding Gate Installation
This is our most common installation in Lynwood by a wide margin. The slide gate runs on a ground track embedded in concrete, and in this city that concrete is often the wildcard. Before we quote a sliding gate job, we inspect the track channel for cracks, heaving, and slab settlement. If the existing track is salvageable, we grind it flush and reuse it. If it’s cracked through, we cut and pour a new track bed. A new slide gate with a rebuilt track channel in Lynwood generally falls between $3,800 and $8,500 fully automated, and it’ll roll clean for years.
Swing Gate Installation
Swing gates are less common in Lynwood because the short setback-to-sidewalk distances rarely allow the swing radius. They do appear on wider corner lots in the city, often double gates. The failure point there is almost always the hinge post, eaten at the base by decades of morning marine-layer humidity and afternoon sun. We replace the post footing, not just the panel. A swing gate installation in Lynwood with new posts and automation typically runs $3,500 to $8,000. If you have a sagging swing gate, ask us to look at the post before you pay anyone to re-hang the panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lynwood
We are trained and equipped on nine gate-automation brands, and in Lynwood we most often see LiftMaster, FAAC, BFT, and Linear on the driveways we install and service. That matters because every brand has different control board diagnostics, different wiring conventions, and different failure patterns. We stock Gate Parts & Welding in Lynwood for these brands and can typically complete a motor or board replacement in a single visit to any Lynwood address. Victor Salinas leads our team, and his background in both welding and automation means the mechanical and electrical sides of your gate are handled by the same company, not passed between subcontractors.
Common Gate Installation Problems We See in Lynwood Homes
- Heaved or cracked ground tracks. Fifty-plus years of slab settling in 90262 leaves embedded track channels uneven. A bottom roller that grinds or derails every few weeks is almost always the track, not the roller itself. We regrind or replace the channel during installation.
- Obsolete 1990s operators. A lot of Lynwood gates were automated during the 1990s and early 2000s security-hardening wave. Those control boards pre-date current UL 325 entrapment-protection standards and often cannot be retrofitted. Replacement with a modern operator and safety photocell is the right call.
- Rust eaten hinge posts. The salt-laden morning marine layer that rolls in from the coast 12 miles west settles on unprotected steel. On swing gates, the post rots at the base first. Fixing the panel without replacing the post means the sag returns within a year.
- Operators sized wrong for the gate. Some of the original installations in Lynwood used residential operators on heavy ornamental iron gates. The motor fights a losing battle and burns out. We match the operator to the actual gate weight, not the old spec sheet.
Pricing for Gate Installation in Lynwood, CA
A basic single-leaf slide gate without automation starts around $1,800 in Lynwood. Add a solid operator, safety photocells, and a new keypad, and that same gate lands between $4,000 and $6,500. A heavy ornamental iron double gate with full automation and Lynwood Gate Access Control runs $6,500 to $9,500. The big variables here are the condition of the existing concrete track, the gate material, and whether the old posts can be reused. For example, on a 1950s bungalow lot off Long Beach Boulevard, our crew replaced a 1998 tubular-steel slide gate whose original LiftMaster operator had seized after years of grinding against a heaved concrete track. We pulled the old post footing, poured a new one, installed a fresh rack-and-pinion drive with a safety photocell, and ground the track channel flush so the new gate rolls clean. That job came to $6,100. Your gate may be different. Call (213) 497-0081 and we’ll give you a free written estimate with an exact price before any work begins.
Standing offers in Lynwood: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Lynwood
While this page is written for Lynwood, our crews regularly work in South Gate, Paramount, Huntington Park, and Bell Gardens. The concrete and gate patterns in those Gateway Cities are similar to what we see in Gate Installation in Lynwood, and we apply the same track-first inspection process wherever we go. If you live in a neighboring city and need a gate installed or brought back to working order, call (213) 497-0081.
Serving Lynwood, CA - Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lynwood
In most cases, no, and that’s because UL 325 entrapment-protection standards changed significantly after those 1990s boards were manufactured. Older control boards often lack the inputs for monitored safety devices like modern photocells and obstruction sensors, and retrofitting them is a losing game. The honest answer is full replacement with a current operator, which runs $1,400 to $2,600 installed in Lynwood including the board, motor, sensors, and labor. Call (213) 497-0081 and we’ll confirm what you have and give you an exact price.
The grinding is almost always the track, not the rollers. Lynwood’s post-WWII concrete slabs have settled unevenly over 50-plus years, and the embedded track channel heaves or cracks along with the slab. Adjusting rollers on a heaved track is a temporary fix that fails again in weeks. Our crew on a 1950s bungalow lot off Long Beach Boulevard reground a track channel flush and the gate rolled clean for good. The repair runs $400 to $900 depending on how much channel work is needed. Call us at (213) 497-0081 for an inspection.
If the post is rusted at the base, the answer is replace the post and inspect the panel before spending on either. In Lynwood’s marine-layer humidity, post bases rot first. A new post with a proper concrete footing runs $800 to $1,500 installed. If the gate panel itself is structurally sound, keep it and re-hang it on the new post. If the panel is also showing weld cracking or rust-through on the lower rail, replacing the whole gate is cheaper than chasing repairs. Call (213) 497-0081 and we’ll tell you straight which path is cheaper.
Usually not, because the short driveways common to 90262 don’t give a vehicle enough room to sit and trigger a loop in a useful way. A properly adjusted reverse mechanism and a photocell across the gate opening handle safety on short Lynwood driveways better than a loop. We’ll evaluate your specific driveway during the free estimate and only recommend a loop if it actually helps.
Yes, we can. Solar gate operators work well in Lynwood because the city gets reliable afternoon sun that suits the panel output. The catch is that the existing gate must roll freely on its track. A gate that’s already grinding or binding will drain a solar battery fast and burn out the motor. We install solar operators from FAAC, BFT, and Linear, and a typical solar retrofit in Lynwood runs $2,600 to $4,200 including panel, battery, operator, and wiring. Call (213) 497-0081 for a free assessment.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lynwood and the surrounding Gateway Cities.
Need a gate installed, replaced, or repaired in Lynwood? Call (213) 497-0081 for a free written estimate. A live person answers, day or night.