Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pico Rivera
Gate installation in Pico Rivera almost always means solving a footing problem before a single panel gets hung. Most homes here were built between 1950 and 1975, and the driveways were never designed to carry the weight of an ornamental iron gate or an automatic opener. A typical driveway gate install in Pico Rivera runs $2,800 to $6,500 for a standard single swing gate with opener, and we quote that price in writing before any work starts. For a straight answer and a free measure, call (213) 497-0081. We serve Pico Rivera from our Los Angeles dispatch office, and a live person picks up 24 hours a day.
Why Ironworks Gate Co. Is Pico Rivera’s Preferred Gate Installation Company
We have spent over 42 years working on gates in the San Gabriel Valley, and Pico Rivera has a signature we see on nearly every job. The housing stock is post-war stucco ranch on modest lots, and the ornamental iron gates that now line those driveways were aftermarket upgrades, added in the 1980s and 1990s by homeowners who were working with local herreros. That means post spacing, hinge bolt patterns, and frame dimensions are rarely standard. Our techs carry fabrication tools on every truck because off-the-shelf hinges and drop rods often do not fit Pico Rivera’s existing gates without modification.
Victor Salinas leads our crews, and the standing rule is simple. We treat every Pico Rivera home the way we would treat a family member’s. Our technicians are background-checked and uniformed, and every job leaves with the same written guarantee: the 90-Day Done Right Promise, our Keystone Standard. If it is not right, we come back and make it right. No paperwork, no arguing.
Pico Rivera homeowners call us for a reason they rarely say out loud but always mean: they have been let down before by a one-truck outfit, and they do not want to make that call twice. Gate Installation is all we do. Repair, automation, access control, welding, new installs. That focus is why a live person answers our phone around the clock, and why we show up when we say we will.
Our Gate Installation Services in Pico Rivera
Driveway Gate Installation
In Pico Rivera, driveway gate work starts underground. The original driveway slabs along streets like Rosemead Boulevard and Slauson Avenue were poured decades ago without gate-post footings. When we install a driveway gate here, we typically cut into the slab, dig a proper 36-inch footing, set the post with anchor bolts through the concrete, and then mount the gate. Attempting to weld or bolt a heavy gate to a post set 18 inches into sidewalk concrete is how you get post lean within six months.
Swing Gate Installation
Swing gates are the most common gate type in Pico Rivera, and for good reason. The city’s ranch-home lots have driveways wide enough for a single or double swing, and the aesthetic matches the ornamental iron already present throughout the neighborhood. A custom single swing gate with a standard opener typically runs $2,800 to $4,200 installed. Wide double swing gates for larger lots off Whittier Boulevard run $5,000 to $8,500, depending on panel weight and opener duty cycle.
Sliding Gate Installation
For homes near the San Gabriel River and Rio Hondo channels where lots are tighter and driveways run close to the house, a sliding gate often makes more sense. These gates need a cantilever or V-track system, and the rail has to be set on a grade beam that stays true through seasonal ground moisture. A rack-and-pinion sliding gate install in Pico Rivera runs $3,800 to $7,200. We prefer rack and pinion over chain drive on wide entrances because chain binds when the gate sags, and rack bolts shear is a problem we see less when the install is done with proper post depth from the start.
Pedestrian Gate Installation
A pedestrian gate off the driveway is the most-used gate on a Pico Rivera property, and the one most often installed wrong. The issue is almost always the hinge post. When a keypad and electric strike get added to a pedestrian gate that was welded into place years ago, the extra cycle count accelerates wear on hinges that were never meant for it. A new pedestrian gate with frame, hinges, and closer runs $900 to $2,400 in Pico Rivera.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pico Rivera
We are trained and equipped on nine gate-automation brands, which matters in Pico Rivera where 20-to-40-year-old gates often have operators from brands that have changed ownership or part numbering over the years. We commonly service and install FAAC, BFT, Linear, and Viking operators throughout Pico Rivera, and we keep the common service parts stocked so we are not waiting on a distributor when a board fails. Most jobs here are completed in a single visit. That is the standard, not the exception.
Common Gate Installation Problems We See in Pico Rivera Homes
- Post lean from shallow footings: The original 1950s driveways were poured without gate footings. A homeowner or handyman sets a post 18 inches into sidewalk concrete, hangs a 300-pound gate, adds an opener, and within a year the post is leaning and the gate drags. We re-set posts in a 36-inch footing with anchor bolts through the slab as standard practice.
- Rack bolt shear on sliding gates: Wide farm-style sliding gates near the San Gabriel River see wind load and ground movement. When a chain drive is used on a gate that needs rack and pinion, the rack bolts shear and the gate stops mid-travel. We size the rack and operator for the actual gate weight and span, not a brochure number.
- Solar opener failure from undersized panels: A solar gate opener on a long driveway off Whittier Boulevard will fail if the panel is mounted under eucalyptus shade without enough amp-hours for Santa Ana wind-load cycles. We size the panel and battery bank for actual solar exposure and gate weight, not the operator’s minimum spec.
- Non-standard hinge patterns on old custom iron: Many Pico Rivera gates were fabricated by neighborhood herreros with whatever hinge bolt pattern fit the day’s work. Off-the-shelf replacement hinges do not fit. We carry fabrication tools to modify or rebuild hinge plates on site.
Pricing for Gate Installation in Pico Rivera, CA
Here is what Pico Rivera homeowners should expect to pay in 2026. A single swing driveway gate with operator: $2,800 to $4,200. A double swing driveway gate with dual operators: $5,000 to $8,500. A sliding gate with rack and pinion: $3,800 to $7,200. A pedestrian gate with closer and strike: $900 to $2,400. A solar conversion on an existing gate: $850 to $2,100, depending on panel size and battery bank.
What moves the price is post footing work, panel weight, and whether we are retrofitting an operator onto an existing gate or building fresh. Every quote is written and agreed before a single bolt turns. Call (213) 497-0081 for a free measure and a written price. You will not get a surprise on the bill.
We Also Serve Cities Near Pico Rivera
Our crews cover Pico Rivera and the surrounding communities daily. If you live in Santa Fe Springs, Bell Gardens, Downey, or Maywood, the same team, the same written guarantee, and the same upfront pricing apply. We schedule by neighborhood, so your appointment window is short and we show up when we say we will.
Serving Pico Rivera, CA - Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pico Rivera
The posts were likely set years ago into the original driveway slab at a depth of 18 inches or less. Most Pico Rivera homes were built before gate footings were part of driveway work, so the post sits in sidewalk concrete that was never meant to hold gate weight plus an opener. When we install, we dig a 36-inch footing and anchor the post through the slab with bolts. That is the fix. Call (213) 497-0081 and we will come measure what you have.
Yes, and we do it regularly in Pico Rivera. The catch is sizing. A panel under eucalyptus shade or angled wrong will not keep a battery bank charged through a Santa Ana wind season. We size the panel wattage and amp-hour bank to the actual gate weight and sun exposure at your property, not the operator’s minimum spec. A typical solar conversion here runs $850 to $2,100.
A swing gate needs room to travel in an arc, which works on most Pico Rivera ranch lots but eats driveway space. A sliding gate runs parallel to the fenceline and needs a straight run of track or a cantilever system. For wide entrances near the San Gabriel River, we generally recommend a rack-and-pinion sliding gate because chain drives bind when the gate sags, and those gates see wind load. We will give you a straight recommendation after measuring your entrance. Estimates are free.
It is almost always the hinge post in Pico Rivera. The added cycle count from a keypad and strike accelerates wear on a hinge post that was set shallow years ago. We come out, check the post depth and plumb, and either re-set it or rebuild the hinge plate. A new pedestrian gate with a properly set post runs $900 to $2,400. Call (213) 497-0081 for a look.
No, and we will not sell you one you do not need. Loop detectors are required on commercial and high-traffic gates, and we recommend them on residential gates where vehicles frequently approach from the street at speed. For a typical Pico Rivera driveway gate, safety photocells and pressure edges often do the job, and we will tell you which is actually required for your setup. The answer is never a surcharge without a reason.
Call Ironworks Gate Co. for Gate Installation in Pico Rivera
If you have an old ornamental iron gate that is sagging at the hinge post, or a new driveway entrance you need built from scratch, call (213) 497-0081. We will come out, measure what you have, and give you a written price before any work starts. That price will not change unless the scope changes, and you will know that in writing before a bolt turns. Our 90-Day Done Right Promise stands behind every Pico Rivera job: done right, and backed in writing.
We set a 16-foot solar gate opener on a swing gate off San Gabriel River Parkway a while back. The owner’s 1990s ornamental iron was sagging at the hinge post because the original post was only set 18 inches into sidewalk concrete. Our techs dug a proper 36-inch footing, re-set the hinge post with anchor bolts through the slab, and paired a DoorKing operator with a loop detector and safety photocells so the wide gate could cycle without binding. That is the standard we bring to every Pico Rivera install.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pico Rivera with gate installation, repair, and automation.